Hi my name is Ulises, i was working in a similar project, to use a 18f4550 like a usb interface to stablish comunication between a pic and the pc. I have just buy a Macbook and I´d like to try the Pinguino. My mail is biotrenn_pt@hotmail.com / biotrenn.pt@gmail.com
Hi, i had troubles trying to open the pinguinobeta6.py using the python lanuncher. I have installef the wxPuthon 2.8, Python 2.5.2. But i have already open the pinguino writing "python (route of the pinguinobeta6.py)" on the terminal.
The trouble is taht when i try to compile one of the example files it trows me a error in line 189 (r etour=self.preprocess(filename) ) and 352 startcomment=false, it says that i must define false
Ulises: Thanks for this remark. The file was updated on pictec for OSX. Can you try again to download and test it please ?
Funlw65: The translation for JALUINO is quite finished. Have you realized the board to test ? I didn't found time to make a PCB. I will send you an example program, tell me if you work on windows or linux.
argentric: Pour windows, une pre-version de la beta 6 est ici: www.pictec.org/pinguino/ en attendant la fin des tests sous MAC OSX.
I don't have yet the possibility to build the board. My supplier (http://adelaida.ro) have only SMD variant for 18F2550 ... I will start building it but it will take a while
I have problem to execute PINGUINO in MAC os x 10.5.6 I can execute the PINGUINObeta6.PY and create the application, but when I try to exe this one... with double click... the application don't running... Unfocused the windows, like a program running, but in near 5 seconds, the program don't work... and come back to the terminal. The program need some additional dependency? greetings.
I am an electronic engineer. I teach programming,interactivity end networks solutions at the Aix en provence School of Art. I work too as a freelance engineer mostly in industrial robotic. I work on Microchip microcontroller since 1997.
14 comments:
Hi my name is Ulises, i was working in a similar project, to use a 18f4550 like a usb interface to stablish comunication between a pic and the pc. I have just buy a Macbook and I´d like to try the Pinguino. My mail is biotrenn_pt@hotmail.com / biotrenn.pt@gmail.com
Hi Jean-Pierre
Very good project!.Only a question. If pinguino is open source, where is source code in python?
A greeting
Hola desde Madrid, Jean-Pierre!
I have a MacOSX in which we could try it, please write me back and we can talk about how we could do it!
Best!
Hola Pablo !!
It's great to receive news from madrid, hope everybody is OK.
I send your an email, thanks.
Hi Jose,
Download pinguino beta 5, the source code is inside......
Hi, i had troubles trying to open the pinguinobeta6.py using the python lanuncher. I have installef the wxPuthon 2.8, Python 2.5.2.
But i have already open the pinguino writing "python (route of the pinguinobeta6.py)" on the terminal.
The trouble is taht when i try to compile one of the example files it trows me a error in line 189 (r etour=self.preprocess(filename) ) and 352 startcomment=false, it says that i must define false
How can i correct this?
Bonjour,
Où a-t-on accès à la beta6 Windows ?
Je n'ai pas vu de liens !
Cordialement
André
0.6 was not released yet. It have access at it as beta tester for Mac OS X. Windows and Linux versions are probably under test by their author.
We have to wait a little more.
Ulises:
Thanks for this remark. The file was updated on pictec for OSX. Can you try again to download and test it please ?
Funlw65:
The translation for JALUINO is quite finished. Have you realized the board to test ? I didn't found time to make a PCB.
I will send you an example program, tell me if you work on windows or linux.
argentric:
Pour windows, une pre-version de la beta 6 est ici:
www.pictec.org/pinguino/
en attendant la fin des tests sous MAC OSX.
enjoy yourself.....
I don't have yet the possibility to build the board. My supplier (http://adelaida.ro) have only SMD variant for 18F2550 ...
I will start building it but it will take a while
It´s compiling correctly
I have problem to execute PINGUINO in MAC os x 10.5.6
I can execute the PINGUINObeta6.PY and create the application, but when I try to exe this one... with double click... the application don't running...
Unfocused the windows, like a program running, but in near 5 seconds, the program don't work... and come back to the terminal.
The program need some additional dependency?
greetings.
Hi walter:
follow this link:
http://jpmandon.blogspot.com/2008/10/pinguino-on-mac-os-x.html
ok with this... thx... now is running the PINGUINO GUI...
thx. again... I will test all the options and program one of them...
by.
Post a Comment