tag:blogger.com,1999:blog-12747071862355549992012-01-15T20:49:31.986ZJean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.comBlogger1511100tag:blogger.com,1999:blog-1274707186235554999.post-9973704987460821292011-12-25T15:50:00.001Z2011-12-25T15:52:27.612Z

Pinguino32 doesn’t support interrupt routines without writing a code in an assembler file. We decided to open interrupt to everybody. To do this, we used some of the special attribute directive of GCC. Now you can deal with Interrupt without assembler. This example show how to use the Timer 1 to increment a counter. // Using interrupt with Pinguino32// Jean-Pierre MANDON 2011#include unsigned

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-51138064483431583432011-12-04T11:02:00.002Z2011-12-04T11:05:38.996Z

Arduino’s idea is to hide the processor and complex C features, working with pins and libraries. Pinguino do the same, but it is also a powerful pedagogical tool to learn embedded systems and C. The Kidules follow this objective, and associate to the learning steps dedicated hardware that allows to concentrate on the software. Once the C and hardware features of the processor are mastered, any

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-62758771200314937622011-11-11T12:05:00.004Z2011-11-11T12:19:50.616Z

Default peripheral speed on Pinguino is programmed to 10 Mhz. For some application, we need to increase this speed ( 10 MIPS is less than a Pinguino 8 bits ). To achieve this, we must use the system library which is located in the /p32/include/pinguino/basics folder ).The peripheral speed is derived from the system clock speed wich is 80 MHZ on Pinguino 32. You can select a peripheral speed with

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-65953122377490612552011-10-01T10:44:00.003+01:002011-10-01T10:47:58.435+01:00

Pinguino is described in the last issue of Open Silicium. This French paper speak about Open Hardware and Open Software.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com4tag:blogger.com,1999:blog-1274707186235554999.post-70188007061473234592011-09-17T10:17:00.004+01:002011-09-17T10:31:48.375+01:00

Pingubot is a small robot based on Pinguino 8 bits. Furri and Bastian designed this board to teach how to drive a robot with Pinguino.The first PinguBot workshop will take place in the OSHWcon event in Madrid. Unfortunately, there is only 16 participant and registering is already closed.We hope we will have soon another workshop somewhere in Spain.Congratulations for this great initiative.More

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-33237411624426564192011-09-06T19:52:00.004+01:002011-09-06T20:00:38.254+01:00

As usual, in the middle of the night, I was playing with my Android phone and Pinguino32. To connect them together, I was searching a USB female/female type A connector everywhere in my office. Finally I made this adaptor with a recycled connector found on an old mother board !!The pin are soldered together on the bottom of the connector.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-81717280623822572312011-09-03T09:37:00.002+01:002011-09-03T09:40:46.981+01:00

Marcus is one of the developers of Pinguino IDE. He focused on LCD and GLCD libraries. He developed this example to show how to compute and display Fractal with Pinguino. This is an example of a Mandelbrot set. More info on Marcus's website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-49601483610399965612011-08-31T19:04:00.002+01:002011-08-31T19:08:46.618+01:00

Julio is a teacher and he uses Pinguino to develop real robot with students. This one is the last robot they built with recycled parts. Congratulations to Julio and all the students working on this project. Visit Julio's blog, it's a great source of information for Pinguino and electronic.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-1418319756646907372011-08-19T09:01:00.004+01:002011-08-19T09:09:29.944+01:00

I discovered this great video today !! This Pinguino data logger built with a 8 bits Pinguino and Gambas is really nice.... Congratulations !!

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-54345438578507981792011-08-17T19:37:00.003+01:002011-08-17T19:51:14.694+01:00

First test of Pinguino32 with Android is done. We incorporated in Pinguino32X the IOIO ADB library and everything is working fine. My son, Thomas presents here my first Android/Pinguino application ( as usual I drive Led !! ) As most of Android devices are not yet upgraded with Android 2.3.4, we decided to use ADB protocol wich is compatible with Android 1.6 and higher. As usual in Pinguino

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-24083522246012056612011-08-01T18:16:00.007+01:002011-08-01T18:52:45.674+01:00

I like to hear about the Pinguino community.... And the Venezuelian community of Pinguino is still very active. PinguinoVE has been created at the beginning of this project, using Pinguino to teach home made digital electronic. All the guys working on this project are proud to see what Pinguino is used for and I like to present again this great team.The last event where PinguinoVE was presented

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-38932661580006421372011-07-15T23:55:00.003+01:002011-07-16T00:06:17.549+01:00

Maddog was here yesterday to celebrate the commemoration of 20 years of Linux. Of course we were there and we took a photo to celebrate with him and all the Campuseros this birthday.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-71090335723274913542011-07-15T10:18:00.004+01:002011-07-15T10:27:21.755+01:00

Hi GuysPinguino workshop is more and more active. We are working on communication with sensors with Pinguino32. Infra-red communication is OK, we can now transmit messages with an infra-red led and receive them with a TSOP module. We are going to share the code today on the blog.Today is our last session, we prepared some code to connect Pinguino32 each other, with IR, Zigbee module and finally,

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-52461117362504781612011-07-14T09:16:00.004+01:002011-07-14T09:34:04.156+01:00

As usual, Campus Party is a great event !!After a quick presentation of Pinguino, we started a "network with sensors" workshop. The goal is to establish communication with sensors beetween PIC32-PINGUINO boards. Light, laser, zigbee, serial and interfacing with a WRT54GL for link with the net.Fortunately, Boops is with us. He designed a shield for Pinguino 32 with 4 IR LED as transmitter and 2 IR

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-16134198769983029772011-06-12T15:29:00.004+01:002011-06-12T15:39:02.383+01:00

I want to build a Temperature sensor powered by a solar panel. I made some test to define the comsuption of Pinguino 32 in different configuration:First configuration:Pinguino 32 is powered by its power connector with a 9 Vdc power supply.The current is about 80 mA on the power supply. Power input is 0,72 Watt.Second configuration:Pinguino 32 is powered by its LiPo charger connector ( as it could

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-37343491037781732132011-06-02T21:44:00.003+01:002011-06-02T21:50:52.659+01:00

This robot is controlled with Pinguino. I like this design and it seems to work as Theo Jansen Robots.Great work, this blog need a visit !!You can find there a lot of ressources for Pinguino.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-25612936490328424262011-06-02T17:57:00.005+01:002011-06-02T18:12:24.509+01:00

I built this very simple temperature sensor with a DS18B20. It is connected on a PIC32-PINGUINO and powered from the data line.The DS18B20 library is very simple to use, just one line to check the temperature on the sensor:#define ONEWIREBUS 9 // define the pin connected to the 18B20+ Dlinevoid setup(){Serial.begin(9600);pinMode(8,OUTPUT);digitalWrite(8,HIGH); // pin 8 is used to

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-41757798051104270002011-06-02T13:50:00.005+01:002011-06-02T14:02:39.759+01:00

Pinguino32 uses a MRF24J40MA radio module to communicate with another Pinguino32 !!This shield uses the UEXT connector of PIC32-PINGUINO and PIC32-PINGUINO-OTG. A very simple library is used to communicate with the module. You need only to initialise the module in the setup()ZIG.init(channel,PAN_ID,Short_Address);then to send data, you must use the ZIG.send instruction as described below:ZIG.send

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-6717656883294011352011-05-26T18:11:00.002+01:002011-05-26T18:19:28.352+01:00

Hi GuysNow Pinguino32X is available for windows. We worked on a lot of improvement for this release. most of the extended functions for 8 bits systems are documented on the pinguino wiki ( wiki.pinguino.cc ). For 32 bits Pinguino, this first version support our Pinguino32 compiler built from GCC4.5.2 and newlib.You can download Pinguino32X windows here.For 32 bits boards, our 32 bits compiler can

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com5tag:blogger.com,1999:blog-1274707186235554999.post-12465450422356537952011-05-09T13:35:00.002+01:002011-05-09T14:03:40.133+01:00

Hi Guys,The last 3 month were dedicated to Pinguino32X development. It's time now to publish the first version of the IDE. What is new in this release ? I didn't write a complete list and we still need to define all the changes. For 8 bits boards, Pinguino is now almost compatible with Arduino language, most of the new features are already detailed in the pinguino wiki ( http://wiki.pinguino.cc )

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com8tag:blogger.com,1999:blog-1274707186235554999.post-7907548670161987802011-02-23T12:13:00.004Z2011-03-06T14:06:38.941Z

Hi guys,I just received the new Pinguino 32 bits board !! This board will be the main support board for Pinguino32X development.... Designed and Built by OLIMEX for the Pinguino community. It have a lot of interesting possibilities:- PIC 32MX440F256H at 80 Mhz,- RTC already on board ( crystal + capacitor ),- LIPO charger,- wide power supply ( 9-30 VDC ),- noise free,- UEXT connector,- shield

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com15tag:blogger.com,1999:blog-1274707186235554999.post-24495592328444241732011-02-16T20:24:00.003Z2011-02-16T20:32:33.206Z

Niti from Thailand send us this video to show use of Pinguino with Processing.We could hope Niti will publish the code to help Processing users to incorporate Pinguino in their application.Driving a 7 segment displayMore poetic with an RGB led !!Thanks for this great application Niti...

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-27119034804681670702011-02-16T20:02:00.005Z2011-02-16T20:32:06.912Z

Hi,Marcus build his own Pinguino 32 bits board with a 32MX795F512LWe are working hard to release the Pinguino IDE with support of 32 bits. It will be a mini board with maxi power !!We should have good news for you soon :-)More info on Marcus website

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-41298607693821313092011-01-29T22:41:00.003Z2011-01-29T22:46:46.438Z

Pinguino is presented in the last Microchip Academic Program Newsletter. Yet another way to support this project for Microchip.You can download the letter on the Microchip website.Have funJP

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-27232059533000643892011-01-11T21:18:00.003Z2011-01-11T21:38:28.363Z

A Pinguino object for processing was developped by Stephane Cousot. Now a similar object exist with Python !!Yeison Cardona wrote this object to use Pinguino with Python without knowledge of C programming. The pinguino side software use CDC to communicate with the computer. The computer use python to drive outputs, read analog inputs and many other things.It is very simple to use, this is a

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-6177942407482641402011-01-02T10:14:00.002Z2011-01-02T10:47:37.407Z

Hi Guys,2010 was a very good year for Pinguino and it's a pleasure to see how this project evolve. I remember the first version, it is not so far, and I am pleased to see that the beta 9-05, even if it is not perfect, is a working version and help to build many different things. This job was done with many contributions, reports and ideas. Each user, in its own way, is a contributor and help to

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-55156182445902141012010-12-27T09:38:00.004Z2010-12-27T09:53:01.444Z

Hi guys,Pinguino beta 9-05 is now available for download. You can download this release on Hackinglab website.As usual, a lot of improvements were made in this beta, this is the changelog:IDE :- new icons set (regino and miniregino)- themes management- new functions (Save/Save as, getCodeSize, ...)- config. file (file history, last window position and size)- regression test shell for the example

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com5tag:blogger.com,1999:blog-1274707186235554999.post-8484784362295256142010-12-27T09:06:00.003Z2010-12-27T09:19:45.864Z

In the last issue of Servo-Magazine, Fred Eady wrote a paper on Pinguino. Fred designed a Pinguino compatible board called Emperor which is sold online by EDTP. He is now working on the 32 bits board wich will be the support for Pinguino32X first release.Discover this article on Servo Magazine Website.More info on the Emperor board on Fred website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-11028731869285271622010-12-14T19:37:00.004Z2010-12-14T19:40:17.329Z

Pinguino beta 9-05 is almost ready. Changelog is very long but you can see here some of the new functions.Have funJP

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-12962281044758095962010-12-14T17:27:00.013Z2010-12-14T18:54:36.644Z

Hi guys,Marcus is still active, working on a great project with Pinguino. He built this radar with an IR sensor and an IR LED. The software is coded with QT and the sensor can see at 360° with a small stepper motor. Range is about 20 cm to 120 cm.The softwareThe sensorThe prototypeMore info soon on Marcus Website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-25017023170146825702010-12-05T13:48:00.005Z2010-12-05T13:56:28.942Z

I love this nice machine !!I would like to have one for chistmas...............See it and a lot of fun design on Pinguino Madrid

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-51957292015907518672010-11-25T21:26:00.013Z2010-11-25T22:29:41.377Z

Hi Guys,Pinguino contest is open !!This contest was initiated by ARDE and Boops.We are pleased to announce that Microchip is sponsoring this contest. So, if you want to be the winner, you need now to fill in the form to join all the competitors.What can you win ?First prize: the best !!PicKit3 programmerPinguino 2550 ARDE on a breadboardGPS development board3 blank 18F4550Second prize the best

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-71076192069613883702010-11-16T19:01:00.010Z2010-11-16T20:27:01.443Z

Hi guys,On linux, we have some problems to use the Serial object to communicate with Pinguino CDC.Unfortunately, the RXTXbin module of JAVA don't recognize the /dev/ttyACM0 port.I found a solution to fix this problem, and a simple working example is detailed here.Create a symbolic link from /dev/ttyACM0 to a more popular name for a serial device ( i chose /dev/ttyS20 )sudo ln -s /dev/ttyACM0 /dev

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-88898955164435127352010-11-15T17:06:00.003Z2010-11-15T17:10:32.946Z

Pinguino 4550 is now available in USA at EDTP store.You can contact Fred for more info.EDTP ELECTRONICS

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-45109423167401361362010-11-14T22:41:00.003Z2010-11-14T22:45:32.228Z

This is the first pinout for Pinguino 32 bits. The digitalw.c library is in progress.74 I/O on this board !!

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-81090190117156734482010-11-08T21:26:00.003Z2010-11-10T18:42:45.501Z

Yet another event organised by ARDE and Boops. This spanish robotic association is very active and want to boost the development of Pinguino.A Pinguino Contest is now open !!If you plan to build a nice robot or drive your home with a Pinguino, it's time to fill the form on boops website.The contest rules are in spanish but will be soon translated to english.Boops blog with complete rules

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-67406472021594576652010-11-04T16:24:00.003Z2010-11-04T17:11:21.472Z

Olivier drive this led display with a 18F2550 Pinguino.Maybe this library could be incorporated in the next IDE version with his support.I would like build a such display for Christmas !!More info on Olivier website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-24164187622006299922010-11-03T19:54:00.004Z2010-11-03T20:04:40.087Z

Jesus and ARDE designed this nice robot to show robotic technology in Campus Party.Pinguino is used as the brain.Their wiki is well documented with nice 3D view.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-17568463574719141072010-11-02T18:10:00.004Z2010-11-02T20:02:42.370Z

Now development is really started on PIC32. We are working with the UBW32 board and Brian ( designer of this board ) like the idea of Pinguino with his UBW32 board.This board is cheap and can be purchased on the net.We are developing some libraries to release Pinguino with PIC32 support. At the beginning, only digital I/O and serial will be implemented, some peripheral libraries will be easy to

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-91671112413430743892010-11-01T10:46:00.004Z2010-11-01T11:45:05.851Z

The timer 1 can be used as a real time clock. I wrote this simple example to test this function.It will be incorporated to the tutorial website.and this is the code to start the clock and display the result on the serial:// Real time clock with a 18F2550 and Pinguino// Jean-Pierre Mandon 2010byte hours,mins,secs;void setup(){// configure TIMER 1 to be used as RTCCTMR1H=0x80;TMR1L=0;T1CON=

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com4tag:blogger.com,1999:blog-1274707186235554999.post-85570445201071188152010-10-25T11:17:00.001+01:002010-12-27T09:54:24.508Z

Pinguino beta 9-04 is now online with CDC support !!http://www.hackinglab.org/pinguino/download/latestpinguino/As usual, i didn't write a documentation :-) but a cdc example is in theexample folder.What is CDC ?A CDC is an USB serial port, on windows it will appear in the system as avirtual com port ( COM7 for example ),in linux, it will appear as a /dev/ttyACM0 device ( or /dev/ttyACM1 if 0exist

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com21tag:blogger.com,1999:blog-1274707186235554999.post-37033503526063826442010-10-13T20:27:00.002+01:002010-10-13T20:33:01.354+01:00

Javi from spain ( Boops ) tested Pinguino windows 7 64 bits.He built a package with everything needed to install Pinguino with Windows 7 32 or 64 bits.This package is available on his website:www.roboops.esThis is the direct link to the Pinguino/windows 7 post.Thanks for this test Boops.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-70751231298677987032010-10-05T11:34:00.003+01:002010-10-05T11:39:39.058+01:00

After a lot of problem with windows 7, i decided to package a new version compatible with this OS.This is the 9-03 version of Pinguino. What is new in this version ?some minor bugs were fixed ( locale and preprocessor )Windows version uses the original python uploaderA complete tutorial, on the tutorial website explain how to install properly pinguino on windows 7.Pinguino beta 9-03 is in the

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-24242121860797268512010-09-20T20:32:00.005+01:002010-10-05T11:40:51.671+01:00

Hi guys,Due to a bug in the serial module, Pinguino beta 9 is updated.( Thanks Alejo for this useful report ).You can download the last release ( beta 9-02 ) here.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-60839136234490112442010-09-12T08:32:00.005+01:002010-09-12T08:42:14.231+01:00

DIDEL S.A is a supplier of robotic systems and teaching modules. This company, from switzerland build and distribute a lot of nice tools. The Kidules are modules that you can connect each other. A Kidules module is now compatible with Pinguino, it is built with a PIC 18F2550.DIDEL S.A websiteKidules documentation

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-32073668948556129092010-09-09T18:06:00.002+01:002010-09-09T18:09:46.524+01:00

Juan from Venezuela tested the servo library for his robotic arm. This library, written by Jesus Carmona is really easy to use and useful for a lot of different tasks.Juan Blog.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-53609656740762662012010-09-04T11:44:00.004+01:002010-09-08T19:05:57.015+01:00

Fritzing is a design software for electronics. I love this software to design small circuits on a breadboard.Now it is possible to use Fritzing with Pinguino board. I designed this component and incorporated it in Fritzing to draw nice Pinguino breadboards......The Pinguino Fritzing component can be downloaded here.You can learn everything about Fritzing here.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-77669177671546993232010-08-28T11:04:00.007+01:002010-08-28T13:51:51.779+01:00

Self Replicating Pinguino on a breadboardHi Guys,Self ReplicationSelf-replication is any process by which a thing will make a copy of itselfNow this is a property of Pinguino. This code allows you to copy the bootloader of your Pinguino in a new blank ( or not ) chip.I tried it with a 18F2550, i don't know if it works with a 18F4550 but it should works.What do you need ?- 3 transistors- 2 LED-

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com14tag:blogger.com,1999:blog-1274707186235554999.post-26696111301504087992010-08-27T18:24:00.006+01:002010-08-27T18:29:56.158+01:00

Yet another member in our community !!Pinguino Thailand is Online......This is a very good news, Welcome

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-32520041327562823852010-08-27T18:06:00.003+01:002010-08-27T18:15:58.013+01:00

Marcus, the king of display, made this' arduino compatible' library for Pinguino.This library, managed by the library user tool of beta 9, can display pictures and text with a lot of different fonts.I plan to incorporate it in beta 9-02. The development is very fast now and it's time to launch new release more often.See all Marcus work on his website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-88954272442148221042010-08-24T13:57:00.005+01:002010-08-24T14:10:07.655+01:00

Yet another great software from Pinguino Madrid.Walter made an installer for Pinguino Windows for Beta 9-01.Try it !!Pinguino installer beta 9

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-60717207581381427792010-08-24T13:45:00.003+01:002010-08-24T13:56:05.605+01:00

Hi Guys,Today i received a lot of good news from Joan Espinosa. This Venezuelian guy is very active and work around Free software, Free hardware and of course Pinguino. Do you remember that Joan initiated the first version of the multi-langage IDE ?Now Joan and his team have a lot of projects around Pinguino. They are testing a .deb package and i will give you the link when it will be ready for

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-47900729218965175812010-08-23T08:14:00.004+01:002010-08-23T08:21:17.890+01:00

Walter from Pinguino Madrid built this Pinguino XBEE.Maybe this is the starting point of our next zigbee module for Pinguino.Great job walter...

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-11809232487244710602010-08-23T08:02:00.005+01:002010-10-05T11:40:26.102+01:00

Hi Guys,Pinguino beta 9 is available in the download area.Many thanks to all the contributors of this new release.This is a major version with a lot of improvement.I will write some document to explain how to develop users libraries( it's easy with beta 9 ) and maybe changes from the last version.Have fun with this new version.JP

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-39078160057996802172010-08-16T11:35:00.003+01:002010-08-16T11:40:39.073+01:00

Sphynx ( Jesus ) built this fantastic servo library for Pinguino. He documented it on the Pinguino wiki and fixed some bugs in the delay function.See all his work on Pinguino and electronic on his blog.Thanks Jesus.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-85345031397594725962010-08-14T21:31:00.002+01:002010-08-14T21:34:52.451+01:00

This is the new GUI of Pinguino. GUI is finished and i am working on libraries.Servos library from Sphynx is already available, now working on the sdcc 2.9.0 integration in Pinguino.JP

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-82406819946215733522010-08-14T20:44:00.004+01:002010-08-14T21:36:56.366+01:00

ARDE is one of the active community in the Pinguino project.it's a real pleasure discover everyday more and more users and contributors in Spain coming from this very active association.Thanks to all.I am happy to continue this great adventure with all those spanish guys.link to ARDE website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-88989899998696239862010-08-14T20:33:00.006+01:002010-08-14T20:41:21.968+01:00

Hi guys,Marcus built this nice LCD character generator for Pinguino. You can build your own set of character and generate the Pinguino syntax.Great work Marcus.See it on Marcus website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-51855355512223671802010-07-15T07:50:00.002+01:002010-07-15T08:00:37.315+01:00

Benoit will animate a workshop with Pinguino in Campus Party Valencia. The theme of this workshop is 'Home Hacking and Pinguino'. We will show how to hack a Linksys router (WRT54GL), connect it to Pinguino with a simple level converter and drive it with LUA and our new libezV24 binding for LUA.Campus Party is a great event and a nice place to show what is possible. All the contributions will be

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-21397226962571203762010-07-15T07:43:00.003+01:002010-07-15T07:48:20.948+01:00

Hi Guys,Herbert built this nice tetris game with Pinguino. This design is very cool, and i love his propeller display. See all his Pinguino work on http://www.youtube.com/user/heberthbmx

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-81719114074867259112010-05-22T20:49:00.003+01:002010-05-22T20:56:43.051+01:00

Hi guys, i am pleased to announce that 'Pinguino Madrid' is now online. This blog, initiated by Walter is a spain place to learn a lot of Pinguino related things.Walter did a great job with Pinguino, Fonera and electronic.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-74846518455036735032010-05-05T13:54:00.002+01:002010-05-05T14:10:44.555+01:00

Yet another small software to check USB communication with Pinguino.I wrote this command line tool for Linux to test USB communication. It can be used as a serial terminal to check process value or text sent from and to Pinguino.Originally, it shall be made with Python, but due to a problem with Python thread and Libusb, i tested it with LUA, and it works !!It can be used both on a computer or on

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-70375462400993148802010-05-01T18:45:00.004+01:002010-08-23T08:09:48.836+01:00

Pinguino beta 8 is available in the download area, this version is multi-language.A lot of contributors helped me for this version:Joan Espinoza initiated the pinguino translation packWim Heirman ( german translation )Marin Purgar ( croatian translation )Vasile Guta Ciucur ( Romanian translation )Raul Zanardo ( install shell on Linux )Ivan Ricondo ( Pinguino tutorial )Furri ( windows debugging

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-47827488280819056002010-04-23T20:54:00.003+01:002010-04-23T20:57:17.448+01:00

This new tutorial explain how to use USB communications with LUA. This example was both tested on a computer an on a FONERA 2.0.My goal is to use LUA to make a USB terminal.See this tutorial on the tutorial website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-71383167125536723422010-04-23T19:43:00.004+01:002010-04-23T19:50:11.992+01:00

The Run led of Pinguino can be used as a normal led. This output is not defined in the list of pins, but you can use it as described below:#define RUNLED PORTAbits.RA4void setup(){}void loop(){RUNLED=1;delay(500);RUNLED=0;delay(500);}Sometimes it could be useful to use it as a general purpose led.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-9104694766909932892010-04-23T19:13:00.009+01:002010-04-23T19:36:10.168+01:00

I work on a zigbee shield for Pinguino. I chose the Microchip MRF24J40MA because it is very cheap ( less than 10€ in France ). I designed this board to convert 5V signals to 3,3V.Now i am working on the driver, i wrote a soft SPI library for Pinguino. Maybe Pinguino will be used as a remote control with this module.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-33607661983309957882010-04-18T08:24:00.004+01:002010-04-18T08:40:00.591+01:00

I'm still in Campus Party today. All flights are cancelled from Madrid to Marseille, so i take this time to post on the blog.Campus Party is a really nice event. I met a lot of people, some of them are Pinguino users and it's a chance to work with them for those 4 days. Others are just curious about our project, i tried to explain what are the differences beetween this project and Arduino and

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-61596490945939232022010-04-05T09:10:00.004+01:002010-04-05T09:12:41.416+01:00

Yet another smd design from Spain............

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-65063007966496634392010-04-04T17:51:00.004+01:002010-04-04T17:57:25.663+01:00

I designed this special pinguino to test a technic on plexiglass. It works, but i need to wait my order of USB connector to test it :(It could be a way to do new objects.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com4tag:blogger.com,1999:blog-1274707186235554999.post-25057841800726192462010-04-03T11:25:00.006+01:002010-04-03T11:57:35.973+01:00

I am working with a GSM modem and Pinguino. To send command to the modem, i used the UART and AT commands. The problem was to set a correct time out when receiving answer from the modem. I wanted to use the millis instruction, but i was afraid by an overflow of the time variable.So i decided to use a hidden variable in Pinguino, _millis. This variable is used in the arduinodelay library and is

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com6tag:blogger.com,1999:blog-1274707186235554999.post-45001033950896444142010-04-01T20:30:00.003+01:002010-04-01T20:34:56.863+01:00

Jeremy started a Pinguino Forum on his website. Yet another welcomed contribution and another way to share ideas, libs and many useful things for us.Thanks to Jeremy.Welcome to all users, sign up here.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-83914096747200446222010-03-24T21:55:00.004Z2010-03-25T16:30:52.167Z

Sergio Alvarez from Colombia did a great job on his blog. A lot of useful example to build and use Pinguino:- a step by step description to build Pinguino on a test board,- What is sometime troobleshoothing with windows,- How to use an I2C ultrasonic range finder ( this one could be integrated in the pinguino tutorial with sergio acknoledgement )and a lot of well documented things.And maybe a

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-72539945162249189162010-03-17T10:54:00.003Z2010-03-17T11:02:18.100Z

I wrote this simple example to help users to associate Processing and Pinguino.Communication is managed by Stephane Cousot Library and USB link.Stephane example program is loaded in the Pinguino with the IDE.A led is connected on PIN 0 of Pinguino.// How to blink a led on PIN 0 with processing// Jean-pierre Mandon 2010import hypermedia.pinguino.*; // import libraryPinguino board; //

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com10tag:blogger.com,1999:blog-1274707186235554999.post-51251789420085084372010-03-14T17:33:00.002Z2010-03-14T18:18:58.603Z

Marin Purgar wrote a perl script to drive a pinguino. It is very simple and well documented on his website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-74795260928992589222010-03-13T10:14:00.005Z2010-03-14T17:35:22.618Z

Marin Purgar from croatia sent me pictures of his design.Marin want to use Pinguino to drive a CNC machine.Great design, congratulations Marin !!

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-20369359828903993372010-03-06T18:37:00.005Z2010-03-06T18:51:47.499Z

EI9GQ built a VFO and used Pinguino to drive LCD.EI9GQ pusblished a paper in the the november 2009 and march 2010 issue of RADCOM, The Radio Society of Great Britain Members' magazine. I'm pleased to know that Pinguino is used in ham radio. A long time ago, i was F6HOJ !!73's EI9GQ...............

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-54357168194941053952010-03-06T12:48:00.003Z2010-03-06T14:43:15.509Z

Raul Zanardo from Brazil wrote a shell script to install Pinguino on Linux.This script was used on Ubuntu 9.10. It download Pinguino on the website, create a folder, copy rules files and create a Microchip group.So you can use pinguino as is with good rules for the USB device.Congratulations Raul.Installation script.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com11tag:blogger.com,1999:blog-1274707186235554999.post-13815486646121093592010-03-06T12:34:00.004Z2010-03-06T12:41:19.813Z

Vasile designed a new 18F4550 board with external power supply.He used Kicad to draw this board. He's currently testing this version and files will be available soon.Nice job Vasile.Vasile website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com6tag:blogger.com,1999:blog-1274707186235554999.post-85725796487421578022010-03-06T11:47:00.007Z2010-03-06T14:42:54.208Z

Joan Espinoza started a great project to develop Pinguino in Venezuela. This is the link to the Website.Joan presented his project during the DevCamp event in february 2010.His goal is to develop and promote Pinguino project for electronics, programmers and students in Venezuela. This community offer help to incorporate a multi-support language for the Pinguino IDE.Thanks Joan and all Venezuelan

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-1981824124520823252010-02-24T21:58:00.001Z2010-02-24T21:59:30.772Z

Ivan wrote a tutorial to explain how works PWM on Pinguino.Follow this link to learn about PWM.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-6302265825829317302010-02-24T21:44:00.004Z2010-02-24T21:49:14.146Z

Benoit did a new version of Pinguino in Copenhagen.This design prove that Pinguino works in the snow !!

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-18116481965404777302010-02-18T20:50:00.004Z2010-02-23T20:01:10.527Z

This guy did a great job with Ivan Ricondo servo library. This library will be integrated in the next version of Pinguino.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-21639769121964663882010-02-07T21:26:00.005Z2010-02-07T21:32:13.701Z

Ivan Ricondo did a great job with its own version of Pinguino. Yet another design, and a lot of example for driving servo and RGB led.Visit Ivan website here.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-69860533296740105752010-02-04T18:42:00.001Z2010-02-04T18:44:38.727Z

A new version ( 1.3 ) of python Vasco downloader is available.A bug in uploadfile function was fixed.You can download it here.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-29174180671921880712009-12-29T21:37:00.007Z2009-12-29T21:46:12.750Z

Now i can run python on my WRT54GL.First, install an SD CARD on the router:Then install Python packages on the SD CARD and run Python:Everything is ready to drive Pinguino with Python serial and OpenWRT !!

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-55212732735232009182009-12-29T12:54:00.003Z2009-12-29T12:58:40.734Z

This new tutorial is dedicated to the linksys router WRT54GL. We connected it to Pinguino via is internal serial port.A complete tutorial is on the tutorial website.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-50153025847896683832009-12-25T12:45:00.002Z2009-12-25T12:46:20.896Z

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-84228810015739325462009-11-29T11:48:00.005Z2009-11-29T11:54:17.638Z

Vijay Anand from india sent us a picture of its Pinguino.Nice job Vijay.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-90304815151861197232009-11-22T17:05:00.003Z2009-11-26T18:26:47.447Z

Benoit Espinola designed an eagle version of the simplified 2550.It will be available soon for download.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com4tag:blogger.com,1999:blog-1274707186235554999.post-53542177147739002362009-11-22T16:30:00.006Z2009-11-24T19:58:42.658Z

I discovered JAL and tried to make it usable with Pinguino bootloader. It's done !!How to do this ?Upgrade your pinguino with bootloader 2.12Create your program and compile it with JAL ( i use piklab to do this ),Convert your program with our jal2pinguino converter: ./jal2pinguino.py jalprog.hex pingprog.hexUpload your program with VascoBoot.pyAdd the option -loader18 8224 -no-fuse to the JAL

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com2tag:blogger.com,1999:blog-1274707186235554999.post-2351210317875225042009-11-22T16:23:00.003Z2009-11-22T16:30:06.830Z

A new version of the bootloader is available. Some bugs were removed ( particulary the start delay wich was a little short for windows computer ) and the bootloader is now compatible with JAL with our hex file converter ( see the next post ).download it here

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-79150442435597031512009-09-28T19:33:00.004+01:002009-09-28T19:39:23.048+01:00

Yet another walter application. Pinguino is connected to the fonera with the serial port. The Fonera run Lighttpd web server with LUA CGI-BIN. The Iphone is connected to the Fonera web server and drive Fonera GPIO and Pinguino.Thanks for the video Walter, you did a great job.......

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-13511114818347319172009-09-14T19:38:00.002+01:002009-09-14T19:42:14.213+01:00

Walter from madrid works on a virtual pinguino model with ISIS on windows.The bootloader works and Pinguino IDE can recognize the module as a real board. There is only a problem of speed when trying to download the code.We will try to fix this.Good idea and good job.......

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com4tag:blogger.com,1999:blog-1274707186235554999.post-82590825976539070572009-09-08T13:16:00.004+01:002009-09-08T13:23:48.535+01:00

Finally, i tested Pinguino on 18F2455 and 4455. These chips offer the same functions but less memory capacity.Everything is OK with bootloader V2, but i programmed the chips with 18F4550 checked. If i check 18F4455 on my programer software, nothing works !!I use a home made JDM programer and IC-PROG with wine.Maybe it will be useful for other users.........

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com11tag:blogger.com,1999:blog-1274707186235554999.post-79142375460442133652009-09-06T17:56:00.002+01:002010-05-01T19:03:33.391+01:00

Pinguino beta 7 is now available for Linux, Windows and MAC OSX.You can download it here.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-2658179989815162452009-09-05T20:04:00.004+01:002010-05-01T19:04:05.622+01:00

Vasile ( FreeJALduino project ) sent me an email to report a problem. With bootloader alpha V2, when Pinguino is external powered, the program didn't start.This bug is corrected in bootloader4550V2.hexThanks for submitting this bug.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com1tag:blogger.com,1999:blog-1274707186235554999.post-3979831339775643872009-09-03T18:14:00.008+01:002009-09-14T19:44:29.590+01:00

Vasi made FreeJALduino, a 18F2550 board exactly like an arduino ( see this post ).I am happy to know that the first test works with a modified version of Pinguino.I plan to integrate a FreeJALduino directive in the next version of pinguino.Congratulations for this nice job Vasi.Vasi website

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com0tag:blogger.com,1999:blog-1274707186235554999.post-65150946878430723252009-09-03T10:11:00.010+01:002009-09-29T20:16:14.512+01:00

This is the last design of tiny pinguino 4550 on a proto-board.It was drawn with Inkscape:You must cut the tracks marked with a red point.I used this home made tool to do this:Now you can sold components and wires. The 18F4550 must be mounted on a suport.This version offers the same functionalities as the PCB version.The booloader V2 must be used with this design.Last upgrade 29/09/2009: Cutting

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com3tag:blogger.com,1999:blog-1274707186235554999.post-55082238804672348602009-08-30T16:34:00.007+01:002009-08-30T16:42:42.974+01:00

Cristian from colombia built its pinguino on a proto-board.Its Pinguino 2550 works with the bootloader V2.

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com6tag:blogger.com,1999:blog-1274707186235554999.post-48368427243793339962009-08-27T08:31:00.006+01:002009-08-27T08:37:10.849+01:00

I started a Pinguino tutorial.If somebody want to contribute, original drawings are made with inkscape ( bread board and Pinguino board ).I will put some other examples soon.Pinguino tutorial

Jean-Pierre MANDONhttp://www.blogger.com/profile/11053245062393177879noreply@blogger.com9